Canadian Consulting Engineer
Report issued on fire safety of tall wood buildingsBuildings Building Structure
The Fire Protection Research Association has issued a report, "Fire Safety Challenges of Tall Wood Buildings." The Fire Protection Research Association is affiliated with the National Fire Protection Association (NFPA), the worldwide agency...
The Fire Protection Research Association has issued a report, “Fire Safety Challenges of Tall Wood Buildings.” The Fire Protection Research Association is affiliated with the National Fire Protection Association (NFPA), the worldwide agency based in Quincy, Massachusetts.
Published December 2013 and announced March 5, the report is written by Robert Gerard and David Barber of Arup North America, and Armin Wolski, San Francisco.
Following is from the introduction:
“Recent architectural trends include the design and construction of increasingly tall buildings with structural components comprised of engineered wood referred to by names including; cross laminated timber (CLT), laminated veneer lumber (LVL), or glued laminated timber (glulam). Construction is currently underway on a 10-story apartment building in Melbourne, Australia, with taller structures up to 30 stories under design in Norway, Austria and Vancouver. These buildings are cited for their advantages in sustainability resulting from the use of wood as a renewable construction material. Claims have been made that they are designed to be safer than buildings fabricated using structural steel due to the formation of an insulating char layer that forms on the perimeter of a laminated wood beam when exposed to a fire.
“The Fire Protection Research Foundation initiated this project to gain an understanding of the performance of these buildings under credible fire scenarios to ensure the safety of the occupants to emissions and thermal hazards, as well as the property protection of the building and nearby structures. The goals of this first phase project was to gather information and data from relevant studies and analyze the knowledge gaps. In addition, a framework prioritization of research needs was produced.”
To access the report, click here.